Kenwood KDC-507 EN User Manual

Page 27

Advertising
background image

Sets the tuning mode.

Tuning mode

Display

Operation

Auto seek

"Auto 1"/

Automatic search for a station.

"AUTO 1"

Preset station seek

"Auto 2"/

Search in order of the stations

"AUTO 2"

in the Preset memory.

Manual

"Manual"/

Normal manual tuning control.

"MANUAL"

Tuning Mode

<In Tuner mode>

Only stations whose reception is good are searched for in auto
seek tuning.

Display

Setting

"Local.S OFF"/ "LO.S OFF"

The local seek function is OFF.

"Local.S ON"/ "LO.S ON"

The local seek function is ON.

Local Seek

<In Tuner mode>

When it's ON, the "NEWS" indicator is ON.
When the news bulletin starts, "NEWS" is displayed, and it
switches to the news bulletin.

• If you choose the "20MIN"/ "20M" setting, further news bulletins

will not be received for 20 minutes once the first news bulletin is
received.

• The news bulletin volume is the same level that was set for

<Traffic Information> (page 16).

• This function is only available if the desired station sends PTY-code

for news bulletin or belongs to <Enhanced Other Network>-
Network sending PTY-code for news bulletin.

• When the News Bulletin Interrupt function is ON, it switches to an

FM station.

It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.

Display and Setting

"NEWS OFF"
"NEWS 00MIN"/ "NEWS 00M"

"NEWS 90MIN"/ "NEWS 90M"

When "NEWS 00MIN"/ "NEWS 00M" — "NEWS 90MIN"/ "NEWS
90M" is set, the News Bulletin Interrupt function is ON.

News Bulletin with Timeout Setting

Function of the KDC-M6024G/KDC-M6024/KDC-V6524/KDC-6024

Switching the preout between the rear and non-fading. (In non-
fading it outputs without effect from the fader control.)

Display

Setting

"SWPRE Rear"

Rear preout.

"SWPRE N-Fad"

Non-fading preout.

Switching preout <In Standby mode>

Function of the KDC-M6024G/KDC-M6024/KDC-V6524/KDC-6024

Dimming this unit's display automatically when the vehicle light
switch is turned ON.

Display

Setting

"Dimmer ON"

The display dims.

"Dimmer OFF"

The display doesn't dim.

Dimmer

— 27 —

KDC-M6024G_U.S r4 02.11.8 9:22 AM Page 27

Advertising
This manual is related to the following products: