Kenwood KVT-911DVD - Manual (Page 14)

B
14
Clock Adjustment Function
Setting the Minutes to "00"
Touch [ RESET ] to set the minutes to "00".
Touch [ RESET ] whilst the minute is below "30"
rounds it off, and whilst the minute is "30" or
more rounds it up.
NOTE
C
A
Turning the Automatic Time
Adjustment On/Off
With automatic time adjustment, you can set
the clock time automatically according to time
data sent from RDS stations (after receiving
RDS signals for several minutes). You can also
set the time manually if the automatic time
adjustment function is turned off. The factory
default is automatic time adjustment.
Touch [ SYNC ] to switch the function on and off.
" ON "
Tune into an RDS station for 3 or 4 minutes The
time adjusts automatically to the correct local time
" OFF "
Manual adjusting
The time is not adjusted when the RDS station you
are tuned to be not transmitting a time signal.
Choose another RDS station in such a case.
Adjusting the Time Manually
No display when the "SYNC" is set to "ON".
NOTE
NOTE
C
Touch [ ∞ ] to make
the hours go back.
Touch [ ∞ ] to make
the minutes go back .
Touch [ 5 ] to
advance the hours.
Touch [ 5 ] to advance
the minutes.
Clock Adjustment Screen
A B
KVT_911DVD_Eng_01 02.1.25 2:24 PM Page 14