1 channels surround processor control function – Kenwood KVT-911DVD User Manual

Page 47

Advertising
background image

5.1 Channels Surround Processor Control Function

47

F

I

E

H

G

D

B

A

C

Digital Effect Setting Screen

Selecting the Dynamic Range

Select the dynamic range for Dolby Digital
sound.

Each time you touch [ D-Range ], the dynamic
range switches as follows:
" Standard "
For more powerful sound at regular volumes.
" OFF "
For regular sound.

Selecting the Multi Channel

Select the sound output speaker for Multi
channel PCM sound.

Each time you touch [

2 ] or [ 3 ] to select the

speaker output as follows:
" 3/2 "
Center, Front and Rear speaker
" 2/2 "
Front and Rear speaker
" 3/0"
Center and Front speaker
" 2/0 "
Front speaker only

You cannot operate when “Dolby PL“ is set to
“OFF”.

Defeat (Crossover network/delay time)

Returns all of the DSP settings to the factory
default.

Touch [ DEFEAT ] it returns to the factory default.

Returning to the Sound Effect Menu
Screen

Touch [ RTN ] to return to the sound effect menu
screen.

NOTE

Selecting the Digital Input Mode

Each time you touch [ Input Select ] to switch the
digital input mode as follows:
" Digital "
Optical digital input.
" Analog "
Analog input.

When playing DTS-encoded (CDs, DVDs),
excessive noise may be exhibited from the
analog stereo outputs. To avoid possible damage
to audio system, the consumer should take
proper pro-cautions when the analog stereo
outputs of the DVD player is connected to an
amplification system.

Using the DOLBY PRO LOGIC

Dolby Pro Logic is a technology developed by
Dolby Laboratories for the active decoding of
Dolby Surround encoded source.

Each time you touch [ Dolby PL ] to select Dolby
Pro Logic on and off .

Selecting the Acoustic Image

Each time you touch [ Bi Phantom ] to select the
acoustic image on and off .

You cannot operate when “Dolby PL“ is set to
“OFF”.

Turning the Center Output On/Off

Each time you touch [ Center SP ] to select center
speaker output on and off.

This select can be made when the 2 ch PCM
signal.

Turning the Sub Woofer Output On/Off

Each time you touch [ Sub Woofer ] to select sub
woofer output on and off.

NOTE

NOTE

CAUTION

C

F

D

B

A

E

G

H

I

KVT_911DVD_Eng_01 02.1.25 2:25 PM Page 47

Advertising