Tagging pictures for printing – Kodak Series 3 User Manual
Page 18
11
www.kodak.com/go/support
Setting up your digital camera
Tagging pictures for printing
NOTE: The following procedure pertains to Kodak EasyShare digital cameras. For information on tagging
pictures on other brands of ImageLink system compatible cameras, see the camera user’s guide.
1 Press the Share button on your camera,
.
2 Press
to locate a picture.
3 Press
to highlight Print
then press the OK button.*
4 Optional: You can apply a print quantity to other pictures. Press
to locate a
picture. Keep the print quantity as is, or press
to change it. Repeat this step
until the desired print quantity is applied to the pictures.
5 Press the OK button, then press the Share button to exit.
* To tag all pictures in the storage location, highlight Print All
), press the OK
button, then indicate the number of copies as described above.
To remove print tagging from all pictures in the storage location, highlight Cancel
Prints
, then press the OK button.
See your camera user’s guide for details.
To print tagged pictures from your Kodak EasyShare digital camera, see
. To
print tagged pictures from your computer, see