Kenwood VR-60RS - Manual (Page 28)

28 EN
Ambience effects
Dimension mode (Pro Logic II x Music mode and Pro Logic II
Music mode only)
When listening to music with certain recordings, you will also be able to
achieve a suitable balance from all the speakers by adjusting the
dimension mode.
1 Press the SOUND key repeatedly until “DIMENSION” appears on
the display.
• The DIMENSION indication scrolls across the display.
2 Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to
adjust the soundfield towards the rear or the front.
Soundfield is adjusted towards the front.
Soundfield is in neutral position.
Soundfield is adjusted towards the rear.
Center Width mode (Pro Logic II x Music mode and Pro Logic II
Music mode only)
Center Width adjustment allows you to enjoy an enhanced sound when
listening to music through center image from only center speaker, or left
and right speakers or various combinations adjustments.
1 Press the SOUND key repeatedly until “CENTER WIDTH” appears
on the display.
• The CENTER WIDTH indication scrolls across the display.
• When the center speaker is switched OFF, this mode will not be
effective.
2 Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to
adjust the left-center-right output.
Center image will be heard from center speaker only.
Center image will be heard from left and right speakers only.
• When in other positions, center image from center speaker, left and
right speakers can be heard simultaneously with various
combinations.
Display dimmer adjustment
The dimmer function lets you select the brightness of this model's
display. You might find this useful if you darken your room to watch
movies or listen to music.
If you want to use the remote control unit, press the TUNER, MD/
TAPE, VIDEO 1, VIDEO 2 or AUX key on the remote control unit
to set it to the receiver control mode.
Each time you press the DIMMER key, the display brightness
changes among the three available settings. Select the brightness
level you find most pleasing.
96kHz LPCM playback
This model is compatible with the 96kHz LPCM playback. To play a 96kHz
DVD, set the listen mode to “STEREO”.
• In F-AUTO input mode, the listen mode will automatically be STEREO.
• When in D-MANUAL input mode (listen mode is not STEREO), “FS
96kHz” will appear in the display and no sound can be heard from the
speakers.
Press the LISTEN MODE key (the listen mode changes to the STEREO
mode) to output sound from the speakers.
*5573/23-28/EN 05.2.10, 10:11 AM 28