Kenwood VR-60RS - Manual (Page 31)

31 EN
In case of difficulty
Remote control unit
Symptom
Remote control operation is not possible.
Cause
• The remote control is set to the DVD player
operation mode.
• Batteries are exhausted.
• The remote control unit is too far away from
the main system, controlling angle is too
large, or there is an obstacle between the
receiver and the remote.
• The remote control has not been changed to
the operation mode for the KENWOOD DVD
player you wish to control.
Remedy
• Press the any of the Input Selector keys to
select the appropriate operation mode.
• Replace with new batteries.
• Operate the remote control unit within the
controllable range.
• Press the CD/DVD key or DVD key to activate
the operation mode for the KENWOOD DVD
player you want to control before operation.
ª
*5573/29-32/EN 05.2.10, 10:11 AM 31