Assembly: parts identifier – Keys Fitness HT-740T User Manual
Page 5
5
Assembly: Parts Identifier
The Healthtrainer HT-740T Treadmill will require assembly before operating. Place
unopened box on a clean, level surface. After opening the box, remove any packing material
from the treadmill.
Do not throw away any packing materials until the unit is working properly.
Do not remove unit from box until it has been fully assembled.
Make sure the electrical cord will easily reach an electrical outlet.
If at anytime you need assistance with assembly, call 888-340-0482.
Locate the hardware pack and identify the following parts required for assembly.
Tools:
1. Allen Wrench- 3/16”
2. Allen Wrench- 7/32”
3. Phillips Screwdriver
U1T1
UAT4
UAT5
UAD1
UAS29
UAS30
UAJ24
UAJ5
UAJ27
UAW8
UAW9
UAW10
UAJ28
UAJ7
UAT6
UAT7
Ref #
Description
Qty
Ref #
Description
Qty
U1T1
MAIN FRAME
1
UAJ24 SCREW ST4.2*12
6
UAT4
LEFT UPRIGHT
1
UAJ5
BOLT M10*25
12
UAT5
RIGHT UPRIGHT
1
UAJ7
BOLT M8x50
4
UAD1 CONSOLE
1
UAJ28 FLAT WASHER 8
6
UAS29 LEFT PROTECTION COVER
1
UAJ27 FLAT WASHER 10
12
UAS30 RIGHT PROTECTION COVER
1
UAW8 #6 ALLEN WRENCH
1
UAT6
LEFT HANDLEBAR
1
UAW9 #5 ALLEN WRENCH
1
UAT7
RIGHT HANDLEBAR
1
UAW10 WRENCH W/SCREW DRIVER
1