Kenwood KDV-MP3346 - Manual (Page 23)

23 ENGLISH
Item Selectable setting, [ Initial ]
AUD CTRL
(audio control)
BASS LEVEL * 2 –8 — +8, [0] : Adjusts the bass level of the selected sound mode.
MID LEVEL * 2 –8 — +8, [0] : Adjusts the middle level of the selected sound
mode.
TRE LEVEL * 2 –8 — +8, [0] : Adjusts the treble level of the selected sound
mode.
BALANCE L15 — R15,
[0] : Adjusts the left and right speaker output balance.
FADER F15 — R15,
[0] : Adjusts the front and rear speaker output balance.
DISP CTRL
(display control)
DIMMER SET • ON
• OFF : Dims the display illumination.
: Cancels.
TEXT SCRL • AUTO
• MANU
: Repeats scrolling automatically (at 5-second
intervals).
: Scrolls the display information once.
Press and hold DISP to scroll the display information regardless of
the setting.
AUD SETUP (audio setup)
VOL OFFSET –8 — +8, [0]
(for AUX)
–8 — 0, [0]
(for other
sources)
: Preset the volume adjustment level of each source.
The volume level will automatically increase or
decrease when you change the source.
• Before making an adjustment, select the source
you want to adjust.
LPF SW * 3 • 85HZ
• 120HZ
• 160HZ
• THRU : Frequencies higher than 85 Hz are cut off.
: Frequencies higher than 120 Hz are cut off.
: Frequencies higher than 160 Hz are cut off.
: All signals are sent to the subwoofer.
* 2 The adjustment made will be stored automatically as <USER> in <SYSTEM Q>.
* 3 Displayed only when <SW SET> is set to <ON> and <SUBW> is selected for <SWITCH PRE> ( 5, 6).
EN22-29_KDV-MP3346M[U]f.indd 23 EN22-29_KDV-MP3346M[U]f.indd 23 11/26/09 4:07:32 PM 11/26/09 4:07:32 PM