Kenwood C-V301 - Manual (Page 42)

42
C-V351/C-V301 (EN)
ENTER
9
To skip an adjustment item
÷ When an adjustment item is not required to be adjusted, press the
MODE key to go to the next adjustment step.
÷ Select only the icons of the adjustment items which require
adjustment.
-20dB
Sub W
ENTER
0
Delay Time
ENTER
Delay Time
20msec
ENTER
!
Input Level -6dB
ENTER
Ambience effects
Adjust the subwoofer level. “SWch”
1 Confirm the Subwoofer adjust-
ment display.
(Select icon as required.)
÷ The level can be adjusted between -20 and +10 dB in steps of 1 dB.
2 Select the "Delay Time".
3 Adjust the delay time.
÷ Find the optimum delay time for the listening room by referring to
“How to calculate the delay time”. ‡
÷ The delay time in the PRO LOGIC mode can be adjusted between 15
and 30 ms.
÷ Select the closest value to the value obtained by “How to calculate the
delay time”.
Delay time
2 Select the "Input Level".
3 Set the input level.
Each press
changes the level.
To quit the setup operation:
If the input level is too high, set it to -6 dB to avoid sound distortion.
÷ The input level can be set to -6 dB or 0 dB.
÷ This adjustment is not available with 6ch INPUT.
÷ If no key on the main unit has been pressed for about 5 seconds, the
display on the main unit disappears and it returns to the status before
the setup mode was entered.
÷ The display on the GRC disappears if no key on the GRC has been
pressed for about 10 seconds.
RC/Main unit
GRC
To decrease To increase
Adjust the delay time. “DELAY”
To decrease To increase
Adjust the input level. “INPUT”
dB s W c h + 1 )
ms
D E L A Y 2 )
dB I N P U T
@ @ @
- 6
RC GRC
RC GRC
RC GRC
GRC
Main
Menu
To decrease
To increase
LEVEL
MULTI
CONTROL
MODE
2 Adjust the level
as required.
1 Select "SWch".
To decrease
To increase
LEVEL
MULTI
CONTROL
MODE
2 Adjust the level
as required.
1 Select "DELAY".
To decrease
To increase
LEVEL
MULTI
CONTROL
MODE
2 Adjust the level
as required.
1 Select "INPUT".
1 Set to "Set Up Sound" mode.
Return Return
ENTER
1 Set to "Set Up Sound" mode.
Return Return
ENTER
2 Adjust the level as required.