Setup for surround play (while listening to music), Setup for surround play, Preparations – Kenwood C-V301 User Manual

Page 39: Select the dolby pro logic surround mode, While listening to music), Adjust the adjustment item (example), Ambience effects

Advertising
background image

39

C-V351/C-V301 (EN)

Select the Dolby Pro Logic surround mode.

1

Setup Sound

Tone/

Balance

Speaker Level

Input Level

Test Tone

DSP

Delay Time

-6dB

Sound

ENTER

Set Up

ENTER

ENTER

PRO LOGIC

ENTER

ENTER

Setup Tone/Balance

Treble

Bass

-8dB

+8dB

L

||||||||||

+

||||||||||

R

7

Setup Speaker Level

-10dB

Surr.L

-5dB

Surr.R

+10dB

Center

-20dB

Sub W

Ambience effects

The setup for surround play can also be performed by
listening to actual music instead of the test tone.
Use the following procedure to adjust surround play while
listening to music.

÷ Play video software marked .

Preparations

Setup for surround play

(while listening to music)

÷ Select the surround mode according to the played source and compo-

nent in use.

÷ Switching is not possible when the 6ch INPUT is used.

Each press switches the adjustment items as shown below.

1 BASS

:Tone, Bass

2 TREBLE

:Tone, Treble

3 L- - - - - - -R :Balance
4 C ch

:Center speaker

5 SR ch

:Surround speaker, Right

6 SL ch

:Surround speaker, Left

7 SW ch

:Subwoofer

8 DELAY

:Delay time

9 INPUT

:Input level

Adjust the adjustment item (example).

2

If no key on the main unit has been pressed for about 5 seconds, the
display on the main unit disappears and it returns to the status
before the setup mode was entered.

The display on the GRC disappears if no key on the GRC has been
pressed for about 10 seconds.

Main operation menu

RC/Main unit

÷ Adjustment items 5, 6 and 8 are not required in the 3 STEREO mode.

÷ With the GRC, the adjustment items shown in a single menu can be

adjusted at once. (The adjustment steps 1,

2 and 3 or steps 4, 5,

6 and 7 are provided in a single menu so they can be adjusted
successively without changing the menu screen.)

RC

GRC

PRO LOGIC

RC

GRC

MODE

When "Tone/Balance" is selected.

GRC

When "Input Level" is selected.

When "Delay Time" is selected.

Setup Sound

Tone/

Balance

Speaker Level

Input Level

Test Tone

DSP

Delay Time

-6dB

When "Tone/Balance" is selected.

When "Speaker Level" is selected.

Setup Delay Time

Delay Time

Delay Time

20msec

20msec

Tone/Balance

Advertising
This manual is related to the following products: