Kenwood C-V301 - Manual (Page 43)

43
C-V351/C-V301 (EN)
2 Entry
Each press switches
the indication.
1 ARENA
2 JAZZ CLUB
3 STADIUM
1
2
3
1 EFFECT
2 BASS
3 TREBLE
4 L- - - - - - -R
5 SRch
6 SLch
7 SWch
8 INPUT
ENTER
Effect
Level
2
Sound
DSP
ENTER
ENTER
ENTER
ENTER
ENTER
DSP Mode Arena
Sound DSP Mode
ENTER
Set Up
Sml Med Lrg
Room Size
Soft Med Hard
Wall Type
Setup DSP Parameter
Effect
Level
1
Select the DSP surround mode.
Select DSP.
Ambience effects
1 Selection cursor
÷ The effects of adjustments are applied equally to sound fields 1 to 3.
÷ Switching is not possible when the 6ch INPUT is used.
Select the adjustment parameter.
Display the setup screen.
To quit the setup mode in the middle:
If no key has been pressed for about 5 seconds, the setup
display disappears and the display returns to the status
before the setup mode was entered.
(Main unit display)
Each press switches the
adjustment parameters.
Select an adjustment parameter icon
by moving the cursor.
÷ Setup/adjustment operations 2 to 8 are to be performed only when
required.
Adjust the effect level. “EFFECT”
3 Enter the setup.
1 Confirm the ”EFFECT“ Level adjust-
ment display.
To decrease
To increase
Go to adjustment step“2 2 2 2 2”.
÷ The EFFECT level can be adjusted between 1 ~ 5.
RC/Main unit GRC
RC/Main unit GRC
To decrease To increase
(Select icon as required.)
E F F E C T
@
2
RC GRC
RC GRC
DSP
MODE
RC GRC
MODE
LEVEL
MULTI
CONTROL
1
2
Setup of the surround effect parameters
(DSP)
4
5 Select the "Tone/Balance".
Return Return
ENTER
2 Adjust the level as required.