Clock adjustment, Displaying the time – Kenwood C-V301 User Manual
Page 45
45
C-V351/C-V301 (EN)
AV CONTROL CERTER KC-2
1
Example: Adjustment to 8:15
CLOCK
÷ The time is represented in 12-hour AM/PM method.
÷ Press the CLOCK key. The hour is entered and the minute display
starts to blink.
3
÷ If you make a mistake, restart from the beginning.
÷ To adjust correct time, press the CLOCK key at the same moment as
a time announcement.
2
TUNING
PTY SELECT
TUNING
PTY SELECT
CLOCK
CLOCK
1 Input selection display
2 DOLBY/DSP/STEREO display
3 Clock display (about 5 seconds)
ENTER
ENTER
Display
ENTER
÷ The time display starts to blink.
Clock adjustment
This unit incorporates a clock function. Be sure to adjust the
correct time before using the timer function.
The time display blinks after a power failure or
when the power cord has been unplugged from
the AC outlet and plugged in again. In such a
case, adjust the clock again.
Activate the clock adjustment mode.
Press the CLOCK key.
Enter the hour.
1 Set the "hour".
To decrease the figure To increase the figure
Enter the minute.
To decrease the figure To increase the figure
Main unit
Main unit
Main unit
: Keys or controls to be used in this operation
Displaying the Time
A M 1 2:) )
A M
8:) )
A M
8:1 5
Each press switches the indication.
RC
GRC
DISPLAY
R O L O G I
P
C A M
8:1 7
MHz
8 9
;
) )
2 Press the CLOCK key.
1 Set the "minute".
2 Press the CLOCK key.
Main
Menu
Main
Menu