Kenwood C-V301 - Manual (Page 49)

49
C-V351/C-V301 (EN)
Check the reservation content.
The reservation contents cannot be cleared. The contents are cleared
only when they are changed.
÷ The reserved contents will be displayed for 2 seconds per item. After
this, the previous display content appears again.
When timer operation is not required
To set the same timer program again
Setting the number of minutes until the unit
is put to standby mode.
Sleep timer
Each press of the key switches the TIMER numbers as follows.
TIMER
MODE
Select the TIMER number to be checked.
TIMER
MODE
Press so that all TIMER No. indicators are
OFF.
TIMER
MODE
Press so that the desired TIMER No. indica-
tors light.
2 Set the time.
1 Switch the unit from STANDBY mode to
ON mode.
ON/STANDBY
Sleep
ENTER
ENTER
ENTER
ON/STANDBY
Timer operation
1 TIMER 1 (Contents of the timer 1 are displayed.)
2 TIMER 2 (Contents of the timer 2 are displayed.)
3 TIMER 1, 2 (Contents of the timer 1 and timer 2 are displayed.)
4 TIMER OFF
To change the reserved contents
Restart the procedure of “Timer programming” from the
beginning.
1 TIMER 1 (Only the timer 1 is carried out.)
2 TIMER 2 (Only the timer 2 is carried out.)
3 TIMER 1,2 (Both timers 1 and 2 are carried out.)
4 TIMER OFF (No timer operation is carried out.)
Each press of the key switches the TIMER numbers as follows.
÷ The reservation contents are held in memory.
Each press of the key switches the TIMER numbers as follows.
1 TIMER 1 (Only the timer 1 is carried out.)
2 TIMER 2 (Only the timer 2 is carried out.)
3 TIMER 1,2 (Both timers 1 and 2 are carried out.)
4 TIMER OFF (No timer operation is carried out.)
÷ Also prepare the disc or tape and adjust the listening volume.
÷ This unit is turned STANDBY automatically after the set time has
elapsed.
÷ The remaining sleep time can be displayed by selecting the Sleep icon
while the SLEEP indicator is lit.
÷ Each press decreases the time by 10 minutes. The maximum time that
can be set is 90 minutes.
90 =80=70...30=20=10=Cancel=90=80...
Lights up. Duration for sleep timer.
To cancel
Turn STANDBY or select “Sleep” icon repeatedly until the
sleep time is cancelled.
Main unit
Main unit
Main unit
Main unit GRC
E E )
SLEEP
s L P 9
RC
SLEEP
Main
Menu
Main
Menu