Kenwood C-V301 - Manual (Page 5)

5
C-V351/C-V301 (EN)
ANTENNA AM
FM 75 Ω
GND
CONNECT WITH
POWER AMPLIFIER
SYSTEM
CONTROL
CD AUX TAPE 1/ MD
IN IN REC PLAY
TAPE 2
(MONITOR)
REC PLAY
MONITOR
OUT
VIDEO
UNSWITCHED
L
R
DVD
IN
AUDIO
FRONT REC PLAY SURROUND
CENTER
SUBWOOFER
LD
/DVD VCR DVD 6CH.INPUT DVD 6CH.INPUT
Also connect the system control cords when the
KENWOOD Audio Component System “SERIES 21” is
connected.
The connected components shown here are given as examples
because the available models vary depending on marketing areas.
System connection
Connection of audio components
(CD player, MD recorder, cassette deck, power amplifier)
Make connection as shown below.
When connecting the related system components, refer
also to the instruction manuals of the related compo-
nents.
Do not plug in the power lead until all connections are
completed.
Malfunction of microcomputer
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the
microcomputer referring to “In case of difficulty”.
R
System
control cord
System control cord
CAUTION (For U.K.)
When using the AC out-
lets equipped with this
unit, be sure to consult
your dealer for the cor-
responding plug.
To wall
AC outlet
* 2 Graphic equalizer
or Cassette deck 2
MD recorder or
Cassette deck 1
* 1 Power amplifier
CD player
Shape of AC outlet
Europe
* 1 For the connection and operation proce-
dures of the power amplifier and speak-
ers, refer to the instruction manual of
the power amplifier (M-A300 or M-A100).
Analog disc turntable
(with built-in equalizer amp)
Connection
cable
CAUTION
Be sure to adhere followings. Or proper ventilation will be blocked
causing damage or fire hazard.
÷ Install the R-SE7 on the top of the system.
÷ Do not place any objects impairing heat radiation onto the
top of unit.
÷ Leave a space around the unit (from the largest outside di-
mension including projection) equal or greater than, shown
below.
Top panel : 50 cm
Side panel : 10 cm
Back panel : 10 cm
* 2 Do not connect system control cord to the cassette
deck connected to the TAPE 2 (MONITOR) jacks.
REC IN
PLAY
OUT
PLAY
OUT REC
IN
LINE
OUTPUT