English – KiSS Networked Entertainment KiSS DP-600 User Manual

Page 11

Advertising
background image

13

english

Possible errors.
- Cable problem, check that there is light in all the ports of the switch/hub
- There is a fi rewall installed on the Computer which blocks the ports used by KiSS PC-Link or KiSS MacLink (port 8000 must be open)
- The player and the Computer are not on the same Subnet (problem with playing video)
- Your Computer has been assigned a new IP address from the DHCP server. It may differ from the one entered in the player. (Using a static IP on the Computer will counter this) - KiSS
PC-Link or KiSS MacLink have to be running for the player to access the data

Equipment required
• A wireless ADSL modem.

Step-by-Step Guide
1 With a direct Internet connection, you can only access the online features such as WebRadio. KiSS PC-Link or KiSS MacLink can NOT be enabled.
2 Start the player, press SETUP on your remote and go to NETWORK SETTINGS. Check that WIRELESS is selected under NETWORK INTERFACE and that

AUTOMATIC CONFIGURATION (DHCP) is ENABLED. Confi gure your wireless connection following the “Setting up a Wireless Network” instruction on the previous page.

When done, press SETUP to exit this menu.

4 Press ONLINE on your remote to select the service you wish to use.
5 If you have any problems please check the FAQ on our web site for any questions, and if that doesn’t help then contact the KiSS Hotline.

Your player should now be connected.

KiSS DP-600

Wireless
ADSL Modem

Internet

Wireless Network using a direct Internet connection

KiSS DP-600

Computer

This service is not yet available, but will be in a future fi rmware release

Equipment required
• A Windows PC or a Macintosh with a wireless card. The Computer can also be connected to the wireless router via Ethernet (wired).
• KiSS PC-Link Software CD for Windows PC or download KiSS MacLink for Macintosh at www.kiss-technology.com/support under Software.

Step-by-Step Guide
1a On the PC select Network Connection in the Control Panel. Open Properties for the network connection that is connected to the Player.

Select Properties for the Internet Protocol (TCP/IP). Select “Use the following IP address”.

1b On the Macintosh go to System preferences and select Network. Click on Confi gure, go under the TCP/IP Pane. Under Confi gure IPv4 select Manually.
2 Enter the IP address below:

IP address 192.168.0.1

Subnet mask 255.255.255.0

3 Start the player, press SETUP on your remote and go to NETWORK SETTINGS. Check that WIRELESS is selected under NETWORK INTERFACE and that

AUTOMATIC CONFIGURATION (DHCP) is DISABLED.

4 Go to NETWORK CONFIGURATION
5 Then enter the following addresses:

IP: 192.168.000.002; SUBNET: 255.255.255.000; GATEWAY: 192.168.000.001; DNS: 192.168.000.001; ALT. DNS: 0.0.0.0

6 Press OK to exit this menu. Then MENU and go to PC-LINK.
7 Press SELECT HOST, the name of the server should appear on your screen, press OK to select it.
8 Choose between AUDIO FILES, VIDEO FILES or PICTURE FILES. The player will display the list of fi les available from your PC.
9 If you have any problems, please check the FAQ on our web site for any questions. If that doesn’t help then contact the KiSS Hotline.

Your player should now be connected.

Wireless Network using a direct connection to the Computer (ad-hoc)

english

Advertising