Connecting your player to a network – KiSS Networked Entertainment KiSS DP-600 User Manual

Page 7

Advertising
background image

9

english

5

Connecting your Player to a Network

Ethernet Connection using a router

Equipment required
• A router, with a built-in switch or a separate switch/hub.
• 2 or 3 straight Ethernet cables.
• A Windows PC or a Macintosh with an Ethernet connection.
• KiSS PC-Link Software CD for Windows PC or download KiSS MacLink for Macintosh at www.kiss-technology.com/support under Software.

Step-by-Step Guide
1 Connect the player to the router’s built-in switch or an external switch/hub which is connected to the router.
2 Connect the Computer to the router’s built-in switch or an external switch which is connected to the router.
3 Check that your Internet connection is working. If any problems occur, contact your ISP (Internet Service provider).

KiSS DP-600

Computer

Router

Internet

KiSS DP-600

Switch

Router

Computer

Internet

While the DP-600 does not come with a hard drive for storing your home videos, music or photos, the DP-600 does support external USB mass storage devices like

hard drives, USB memory sticks and certain card readers. To connect such a device, simply remove the cover in the lower right part of your player’s front panel.
Behind the cover you will find an USB port. There is also an USB port on the back of your player. See the Chapter “Overview of the Player” if you are unsure where
these ports are. Connect your device to either one of these ports.

Once you have connected your device properly, you can access the files on your device by pressing the MENU button of your remote control to enter the Player menu.

Go to the USB section select the type of content you would like to browse.

Note: The DP-600 supports the following file systems on mass storage devices: FAT16, FAT32 and NTFS.
If you do not know which file system your mass storage device is using, please consult the User Guide for the device or contact the manufacturer for this

information. Please also note that the DP-600 only supports mass storage devices in “read only” mode. This means that you cannot rename, delete or in any other
way alter your files on the drive from the DP-600.

USB Mass Storage Device Connection

english

Advertising