Konica Minolta 2430 DL - Manual (Page 15)

Specifying Print Settings 13
Layout Options
The Layout section is used to specify the number of pages per sheet of
paper and other layout options when printing.
„ Pages Per Sheet
This specifies the number of pages to be printed on one sheet of paper.
For example, if 2 is selected, two pages are printed on one sheet of paper.
If more than one page is printed on one sheet of paper and the Print Bor-
der check box is selected, a border is printed around the image of each
page printed on one sheet of paper.
„ Print Both Sides
This specifies that both sides of the paper will be printed on.
When Print Both Sides is selected, you can select the Binding setting to
specify if the binding edge is along the long edge or the short edge of the
paper.
"
To print on both sides of the paper, the optional Duplexing Unit must
be installed on the printer.
In addition, the printer must be set up with the Chooser to use the
duplex unit. For details on selecting the duplex unit with the Chooser,
refer to “Selecting the Printer in the Chooser” on page 3.
When Print Both Sides is selected, you may not be able to use some
types of paper. For details, refer to the User’s Guide (CD-ROM) pro-
vided with the printer.