Konica Minolta NC-503 User Manual
Network interface card nc-503
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Introduction
- 1 Getting ready
- 2 Network printing
- 3 Network scanning
- 4 Network settings
- 4.1 Network settings
- 4.2 Specifying settings from the control panel
- 4.3 NETWORK SETTING
- 4.4 E-MAIL SETTING 1
- Programming the sender’s name
- Specifying the e-mail address of the sender
- Specifying the SMTP server address
- Specifying the SMTP port number
- Specifying the SMTP server connection timeout
- Specifying the text input setting
- Specifying the subject of e-mail messages
- Specifying the POP before SMTP setting
- 4.5 E-MAIL SETTING 2
- 4.6 USER SETTING
- 5 Registering destinations
- 6 Performing a Scan to E-mail operation
- 6.1 Basic transmission
- 6.2 Changing the transmission settings
- 6.3 Changing the scanning quality settings
- 6.4 Changing the document scanning density
- 6.5 Specifying the default scanning settings
- 6.6 If the memory becomes full while scanning documents
- 6.7 Specifying a one-touch dial destination
- 6.8 Specifying a speed dial destination
- 6.9 Specifying a recipient from a group dial destination
- 6.10 Selecting a destination from the phone book
- 6.11 Checking the communication results
- 7 Performing a Scan to Server (FTP) operation
- 8 Using PageScope Web Connection
- 8.1 When using PageScope Web Connection
- 8.2 About PageScope Web Connection
- 8.3 System requirements
- 8.4 Accessing PageScope Web Connection
- 8.5 Structure of pages
- 8.6 Logging on to Administrator mode
- 8.7 User mode
- User mode tabs
- System tab - Summary
- System tab - Details - Input Tray
- System tab - Details - Output Tray
- System tab - Details - ROM Version
- System tab - Details - Interface Information
- System tab - Details - Consumable
- System tab - Maintenance - Counter
- System tab - Online Assistance
- Job tab - Print Job Management
- Job tab - File Download
- Print tab - Settings - Paper Handling
- Print tab - Settings - Page Layout
- Print tab - Settings - Printer Setting
- Print tab - Test Print
- Print tab - Font Information
- Scan tab - One-Touch Dial Setting
- Scan tab - Speed Dial Setting
- Scan tab - Group Dial Setting
- Network tab - Summary
- 8.8 Administrator mode
- Administrator mode tabs
- System tab - Summary
- System tab - Details
- System tab - Preference
- System tab - Save Setting
- System tab - Maintenance - NIC and Printer Controller Reset
- System tab - Maintenance - Initialize
- System tab - Maintenance - Counter
- System tab - Online Assistance
- Job tab - Print Job Management
- Print tab - Settings - Paper Handling
- Print tab - Settings - Page Layout
- Print tab - Settings - Printer Setting
- Print tab - Test Print
- Print tab - Font Information
- Scan tab - One-Touch Dial Setting
- Sample page: For a fax destination
- When “Fax” is selected:
- When “E-Mail” is selected:
- When “Group Dial” is selected:
- Scan tab - Speed Dial Setting
- Sample page: For an e-mail destination
- When “Fax” is selected:
- When “E-Mail” is selected:
- When “FTP Server Address” is selected:
- Scan tab - Group Dial Setting
- Scan tab - Fax Configuration
- Scan tab - Downloading/Uploading Destination List
- Upload
- Network tab - Summary
- Network tab - TCP/IP Configuration
- Network tab - NetWare Configuration - NetWare Setting
- Network tab - NetWare Configuration - NetWare Status
- Network tab - IPP Configuration
- Network tab - SMTP & POP3 Configuration
- Network tab - FTP & DNS Configuration
- 9 Troubleshooting
- 10 Appendix