Konica Minolta NC-503 - Manual (Page 40)

Network printing 2
NC-503 2-17
8
Select “Custom”, and then click the [Settings] button.
9
Select “LPR” in the protocol group box, type the queue name in the
“Queue Name” box of the “LPR Settings” group box, and then click the
[OK] button.
– Type in a queue name that begins with a letter (for example, “print”).
10
Click the [Next] button.
11
Click the [Finish] button.
12
Click the [Close] button.
13
Click the [Close] or [Apply] button.
PORT9100 printing
Compatible operating systems: Windows 2000/Windows XP/Windows Serv-
er 2003
2
Reminder
Before specifying settings, check that the following preparations have
been completed.
The computer can communicate using the TCP/IP protocol.
This machine can communicate using the TCP/IP protocol.
The printer driver is installed on the computer.
(If the GDI driver is to be installed, refer to the User’s Guide for the GDI
printer controller, included with this machine. If the PCL driver (optional)
is to be installed, refer to the User’s Guide for image controller IC-206,
included with the IC-206 option.)
1
For Windows 2000: On the Start menu, point to “Settings”, and then
click “Printers” to open the Printers folder.
For Windows XP/Server 2003: On the Start menu, click “Control Pan-
el”, then “Printers and Other Hardware”, and then click “View installed
printers or fax printers” to open the Printers and Faxes folder.
2
Right-click the printer icon.
3
Click “Properties” to open the Properties dialog box.
4
Click the Ports tab, and then click the [Add Port]button.