Konica Minolta NC-503 User Manual
Page 132
Advertising
Performing a Scan to E-mail operation
6
NC-503
6-25
–
If “MANUAL” is selected, a screen appears, allowing you to adjust
the density. Press the [*] or [)] key to adjust the density. Adjusting
the setting to the left reduces the density (lightens the image). Ad-
justing the setting to the right increases the density (darkness the
image).
When the [OK] key is pressed after the density setting is adjusted, the
message “ACCEPTED” appears, and then the Scan mode screen ap-
pears again with the adjusted density setting indicated.
2
Note
The manufacturer’s default setting is “AUTO”.
Advertising
This manual is related to the following products: