Konica Minolta NC-503 User Manual
Page 162
Advertising
Performing a Scan to Server (FTP) operation
7
NC-503
7-9
When “MANUAL” is selected
2
Note
If “MANUAL” was selected, the scanning size can be changed.
The settings available for the scanning size are METRIC (“A3w”, “A4w”,
“A4v”, “A5w”, “A5v”, “B4w”, “B5w”, “B5v”, “FLSw”, “8Kw”, “16Kw”,
“16Kv”) and INCH (“11Ч17”, “11Ч14”, “LGLw”, “LTRw”, “LTRv”, “IN-
Vw” and “INVv”).
1
If “MANUAL” was selected in step 6 and the [OK] key is pressed, the
following screen appears.
2
Press the [,] or [+] key until the appropriate scanning size is selected,
and then press the [OK] key.
The selected scanning size appears.
3
Press the [OK] key.
The message “SCANNING” appears, and the following screen appears
when scanning is finished.
Advertising
This manual is related to the following products: