Konica Minolta NC-503 - Manual (Page 152)

Performing a Scan to E-mail operation 6
NC-503 6-45
3
Press the [,] or [+] key until “TX/RX RESULT” is selected.
– If fax kit FK-506 is installed.
4
Press the [OK] key.
All communication results are displayed.
– The communication results appear starting with the most recent
jobs. Press the [,] key to display communication results for older
jobs.
– The NTP server can be specified if network interface card NC-503
or image controller IC-206 has been installed on the machine.
– The transmission results appear differently depending on whether
or not an NTP server has been specified.
– If an NTP server was specified:
The transmission number and transmission date and time appear
for data sent with the Scan to E-Mail or Scan to FTP operation.
– If an NTP server was not specified:
Only the transmission number appears for data sent with the Scan
to E-Mail or Scan to FTP operation, but the transmission date and
time do not appear.