Konica Minolta NC-503 - Manual (Page 42)

Network printing 2
NC-503 2-19
2
Reminder
Before specifying settings, check that the following preparations have
been completed.
The computer can communicate using the TCP/IP protocol.
This machine can communicate using the TCP/IP protocol.
The printer driver is installed on the computer.
(If the GDI driver is to be installed, refer to the User’s Guide for the GDI
printer controller, included with this machine. If the PCL driver (optional)
is to be installed, refer to the User’s Guide for image controller IC-206,
included with the IC-206 option.)
Checking IPP-related settings from PageScope Web Connection
For details on PageScope Web Connection, refer to “Using PageScope Web
Connection” on page 8-1.
1
Start up PageScope Web Connection.
2
Type in the password to log on to the Administrator mode.
– For the password, consult with the network administrator.
3
Click the Network tab, and then click “IPP Configuration” in the menu.
4
Make sure that the “Enable IPP” check box is selected. If the check box
is not selected, IPP printing cannot be performed.