Konica Minolta NC-503 User Manual
Page 143
Advertising
6
Performing a Scan to E-mail operation
6-36
NC-503
2
Press the [Speed Dial] key, and then use the keypad to type in the 3-
digit speed dial number (number programmed with the e-mail address).
3
Press the [OK] key.
The destination is specified.
2
Note
The recipient must have been registered with a speed dial number in ad-
vance.
For details on programming speed dial numbers, refer to “Registering
destinations” on page 5-1.
If the number was incorrectly entered, press the [Back] key, and then type
it in correctly.
Advertising
This manual is related to the following products: