Konica Minolta NC-503 - Manual (Page 112)

Performing a Scan to E-mail operation 6
NC-503 6-5
– For information on documents that can be used and the scanning
area of the image, refer to the User’s Guide included with this ma-
chine.
3
Using the keypad, type in the e-mail address of the recipient.
– When the destination address is entered, “OTHER SETTING=,”
appears. To change the transmission settings, such as the subject,
cc address or file format, press the [,] key. The “SCAN OTHER
SETTING” menu appears. For details on changing the transmission
settings, refer to “Changing the transmission settings” on
page 6-10.
– The destination can be specified using any of the following proce-
dures.
Refer to “Specifying a one-touch dial destination” on page 6-33.
(One-touch dial destinations are available only when optional fax kit
FK-506 is installed.)
Refer to “Specifying a speed dial destination” on page 6-35.
Refer to “Selecting a destination from the phone book” on
page 6-39.
– Up to 64 characters can be entered.
4
Press the [Start] key.
The “BOOK SCAN” menu appears.