Konica Minolta NC-503 - Manual (Page 70)

Network settings 4
NC-503 4-19
2
Press the [,] or [+] key until “ADMIN. MANAGEMENT” is selected, and
then press the [OK] key.
3
Type in the administrator access code, and then press the [OK] key.
– For the administrator access code, consult with the network admin-
istrator.
– The manufacturer’s default setting is “000000”.
4
Press the [,] or [+] key until “E-MAIL SETTING 1” is selected, and then
press the [OK] key.
– If fax kit FK-506 is installed