Specifying the snmp setting, Specifying the snmp setting -17 – Konica Minolta NC-503 User Manual
Page 68
Advertising
Network settings
4
NC-503
4-17
Specifying the SNMP setting
1
In the “NETWORK SETTING” menu, press the [,] or [+] key until
“SNMP SETTING” is selected, and then press the [OK] key.
2
Press the [,] or [+] key until “DISABLE” or “ENABLE” is selected, and
then press the [OK] key.
–
Whether “DISABLE” or “ENABLE” is selected, the message “AC-
CEPTED” appears, and then the “NETWORK SETTING” menu ap-
pears again.
Advertising
This manual is related to the following products: