Konica Minolta NC-503 - Manual (Page 82)

Network settings 4
NC-503 4-31
Specifying the POP3 account
1
In the “E-MAIL SETTING 2” menu, press the [,] or [+] key until “POP3
ACCOUNT” is selected, and then press the [OK] key.
2
Type in the account name.
– The account name can contain a maximum of 64 characters.
– For the account name, consult with the network administrator.
3
Press the [OK] key.
After the message “ACCEPTED” appears, the “E-MAIL SETTING 2”
menu appears again.
2
Note
If a number was incorrectly entered, press the [Clear/Stop] key to erase
the number, and then type it in correctly.