Konica Minolta NC-503 - Manual (Page 64)

Network settings 4
NC-503 4-13
2
Reminder
In order to apply the new settings, the machine must be turned off, then
on again to be restarted.
Specifying the gateway transmission setting
1
In the “NETWORK SETTING” menu, press the [,] or [+] key until
“GATEWAY TX” is selected, and then press the [OK] key.
2
Press the [,] or [+] key until “DISABLE” or “ENABLE” is selected, and
then press the [OK] key.
– Whether “DISABLE” or “ENABLE” is selected, the message “AC-
CEPTED” appears, and then the “NETWORK SETTING” menu ap-
pears again.
2
Note
The setting for gateway transmissions appears when optional fax kit FK-
506 is installed.