Konica Minolta NC-503 - Manual (Page 39)

2 Network printing
2-16 NC-503
4
Click the Details tab, and then click the [Add Port] button.
5
Select “Other”, and then select “Peer2Peer” from the “list of port
types”.
6
Click the [OK] button.
7
Type in the IP address of this machine, and then click the [OK] button.
8
Click the [Apply] or the [OK] button.
LPR printing
Compatible operating systems: Windows 2000
2
Reminder
Before specifying settings, check that the following preparations have
been completed.
The computer can communicate using the TCP/IP protocol.
This machine can communicate using the TCP/IP protocol.
The printer driver is installed on the computer.
(If the GDI driver is to be installed, refer to the User’s Guide for the GDI
printer controller, included with this machine. If the PCL driver (optional)
is to be installed, refer to the User’s Guide for image controller IC-206,
included with the IC-206 option.)
1
On the Start menu, point to “Settings”, and then click “Printers” to
open the Printers folder.
2
Right-click the icon for the installed printer.
3
Click “Properties” to open the Properties dialog box.
4
Click the Ports tab, and then click the [Add Port] button.
5
In the Printer Ports dialog box, select “Standard TCP/IP Port”, and then
click the [New Port] button.
6
After the Add Standard TCP/IP Printer Port Wizard starts up, click the
[Next] button.
7
Type the IP address of this machine into the “Printer Name or IP Ad-
dress” box, and then click the [Next] button.