Konica Minolta NC-503 - Manual (Page 30)

Network printing 2
NC-503 2-7
IPP printing
1
Connect the network cable. (Refer to “Connecting to a local area net-
work (LAN)” on page 1-12.)
2
From the machine’s control panel, specify the IP address, subnet mask
and default gateway. (Refer to “Specifying an IP address” on page 2-9.)
3
Print the settings information, and then check the settings. (Refer to
“Printing the settings information” on page 2-13.)
– If optional fax kit FK-506 and image controller IC-206 are not in-
stalled, the settings information cannot be printed from the ma-
chine’s control panel.
4
Install the printer driver. Specify the network port when the driver is in-
stalled.
– If the GDI driver is to be installed, refer to the User’s Guide for the
GDI printer controller, included with this machine. If the PCL driver
(optional) is to be installed, refer to the User’s Guide for image con-
troller IC-206, included with the IC-206 option. For details on spec-
ifying the network port, refer to “Connecting the computer and this
machine over a network” on page 2-15.