Konica Minolta NC-503 - Manual (Page 43)

2 Network printing
2-20 NC-503
IPP printing connections
Establish the IPP printing connection. The IPP printing connection must be
set up starting from the installation of the printer driver. (If the GDI driver is to
be installed, refer to the User’s Guide for the GDI printer controller, included
with this machine. If the PCL driver (optional) is to be installed, refer to the
User’s Guide for image controller IC-206, included with the IC-206 option.)
1
For Windows 2000: On the Start menu, point to “Settings”, and then
click “Printers” to open the Printers folder.
For Windows XP/Server 2003: On the Start menu, click “Control Pan-
el”, then “Printers and Other Hardware”, and then click “View installed
printers or fax printers” to open the Printers and Faxes folder.
2
Start up the Add Printer Wizard, and then click the [Next] button.
3
Select “A Network printer or printer attached to another computer”,
and then click the [Next] button.
4
Select “Connect to a printer on the Internet or on a home or office net-
work”.
5
Type “http://<this_machine_IP_address>/ipp.cgi” into the URL field.
– (Example) If the IP address for this machine is 192.168.1.20:
http://192.168.1.20/ipp.cgi
6
When the [Next] button is clicked, a confirmation message appears.
7
Click the [OK] button.
8
Follow the instructions that appear in order to finish the installation of
the printer driver.