System tab - maintenance - counter, System tab — maintenance — counter -38 – Konica Minolta NC-503 User Manual

Page 203

Advertising
background image

8

Using PageScope Web Connection

8-38

NC-503

Restore Factory Defaults

The network interface card and image controller can be initialized.

1

Click the [Restore] button beside either “Printer Controller” or “NIC”.

2

When the confirmation message appears, click the [Yes] button.

To stop initializing, click the [No] button.

2

Reminder

Jobs being processed are not saved when the initialize operation is per-
formed.

Be careful since the current PageScope Web Connection settings will be
lost.

Initializing the printer controller is possible only if optional image control-
ler IC-206 is installed.

System tab — Maintenance — Counter

Counters managed by the machine can be displayed.

2

Note

The information that is displayed differs depending on the installed op-
tions and the specified settings.

Advertising
This manual is related to the following products: