Kodak A-61003 - Manual (Page 9)

A-61003 September 1993 EB-7
Scanner 900 or Scanner 923: Setup:
√
Turn on main power switch, if necessary.
√
Turn on side panel switch.
√
Calibrate the machine.
√
Adjust the feed/separator rollers.
√
Adjust the feed shelf.
√
Adjust the feeder side guides.
√
Adjust the exit hopper side guides.
√
Adjust the exit hopper end stop.
√
Install the proper exit hopper deflector.
√
Prepare documents to feed into transport.
Running a Job:
√
Enable the machine from the host system.
√
Select an application mode.
√
Input any temporary/override operating values.
√
Enter or verify the starting Image Address.
√
Enter or verify the starting document image level.
√
Press the Run key.
√
Feed documents.
√
Press the Stop key.
√
Execute Scanner End-of-Job.
√
Remove documents from the exit hopper.
√
Turn off side panel switch.
√
Turn off main power switch, if necessary.