Kenwood D-R350 - Manual (Page 17)

17
D-R350 (En)
To check or change the programmed tracks
÷ Press it while the “PGM 01” indicator blinks.
÷ The track being played cannot be changed.
÷ Perform only step 1 to simply check the program.
÷ In the case of a CD-TEXT disc, the track’s title is scrolled on the display.
÷ Each time the key is pressed, the program No. and the track No. on CD
are displayed.
Example
↓
Auto space function
During programming of tracks, a non-recorded space of a few
seconds will be automatically created between tracks.
By recording tracks with these spaces on tape, the search and
repeat play operations of tape using the DPSS function (which
works by searching the non-recorded spaces) can be performed
reliably.
1
Press the CHECK key.
GRC operation RC operation
Programmed play (PGM mode)
D G P 0 M 1 5 T O N 2 . 5
Blinks.
To clear tracks from the program
Remote control unit only
Press to clear tracks from the end.
GRC operation RC operation
P.mode
ENTER
To clear all track.
÷ Selected tracks can be also completely cleared just by operating the 0
key.
÷ The entire program is cleared.
÷ Each time the key is pressed, the last track in the program is cleared.
÷ The tracks which are programmed earlier than the track being played
cannot be cleared.
To add a track to the program
÷ When a track No. is selected, the track will be added to the end of the
existing program.
GRC operation RC operation
1
Select the disk.
4
Set the entry.
1 2 3
4 5 6
7 8 9
0 +10
ENTER
+10
5 4 3 2 1
0 9 8 7 6
3
Select the new track No.
2
Select the disk.
REPEAT
DISC SKIP
Press until the track No. to
be changed is displayed.
REPEAT
DISC SKIP
CHECK
2
Select the desired track No.
+10
5 4 3 2 1
0 9 8 7 6
3
Press the P.MODE key.
Disc Skip
ENTER
P.mode
ENTER
Clear
ENTER
1 2 3
4 5 6
7 8 9
0 +10
ENTER
Disc Skip
ENTER
Check
ENTER
P.MODE
CLEAR
P.MODE
÷ Even when the performances of two tracks are continuous (which
occurs with classical or live recording music), the spaces will be
created if they have different track Nos.