Kathrein UFS 650sw - Manual (Page 14)

14
FIRST INSTALLATION: General
Use the

buttons here to select the setting to match your reception system. You have the following
options:
- DiSEqC™1.0
-
Simple LNB or
- Single-cable system
Now continue with the fi rst installation chapter that applies to your reception system.
When selecting the LNB type in the setting that applies to you, note that “Wideband”
is available only for the “single-cable system” setting!
Picture format
Here you select the type of screen display, depending on the setting of your TV format:
- TV format “4:3”: Pan & Scan or Letterbox
- TV format “16:9”: “Automatic” or “Always 16:9”
TV-Scart-Output
Select the type of video signal at the TV Scart socket here. Select the signal that your TV set can process.
- FBAS - composite colour signal or
- RGB - Red/Green/Blue signal
HDMI format
Here please select the format (resolution) that will be output at the HDMI socket. Select the resolution
appropriate to your TV set.
Available options: Auto (automatic format choice), 576p, 720p or 1080i
Press the
$
(green) button to move to the next menu. The following display appears: