Kenwood KRF-V7060D - Manual (Page 42)

42 EN
Specifications
For the U.S.A and Canada
AUDIO section (VR-6050)
Rated power output during STEREO operation
Effective power output during SURROUND operation
FRONT (20 ~ 20 kHz, 0.09 % T.H.D. at 8 Ω one channel driven)
............................................................................... 100 W + 100 W
CENTER (20 ~ 20 kHz, 0.09 % T.H.D. at 8 Ω one channel
driven) .................................................................................. 100 W
SURROUND (20 ~ 20 kHz, 0.7 % T.H.D. at 8
Ω one channel
driven) ................................................................... 100 W + 100 W
Total harmonic distortion ....................... 0.009 % (1 kHz, 50 W, 8 Ω)
Frequency response
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)
................................................. 10 Hz ~ 100 kHz, +0 dB ~ –3.0 dB
Signal to noise ratio (IHF’66)
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)
............................................................................................... 95 dB
Loudness control
VOLUME at –30 dB level ...................................... +6 dB (100 Hz)
Input sensitivity / impedance
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)
.............................................................................. 500 mV / 47 k Ω
Output level / impedance
TAPE REC ............................................................... 500 mV / 1 k Ω
PRE OUT (SURROUND BACK CHANNEL) .............. 2.5 V / 1 k Ω
PRE OUT (SUBWOOFER) ......................................... 2.5 V / 1 k Ω
Tone control
BASS ................................................................ ±10 dB (at 100 Hz)
TREBLE ............................................................ ±10 dB (at 10 kHz)
For other countries (except for the U.K.)
AUDIO section (KRF-V7060D/V6060D)
Effective power output during STEREO operation
1 kHz, 10 %, 8 Ω ......................................................... 110 W + 110 W
Rated power output during STEREO operation
Effective power output during SURROUND operation
FRONT (1 kHz, 10 % T.H.D. at 8 Ω one channel driven)
............................................................................... 110 W + 110 W
CENTER (1kHz, 10 % T.H.D. at 8 Ω one channel driven)
.............................................................................................. 110 W
SURROUND (1 kHz, 10 % T.H.D. at 8 Ω one channel driven)
............................................................................... 110 W + 110 W
Total harmonic distortion ........................ 0.009% (1 kHz, 50 W, 8 Ω)
Frequency response
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)
................................................. 10 Hz ~ 100 kHz, +0 dB ~ –3.0 dB
PHONO ‘RIAA’ response (KRF-V7060D)
.................................................. 40 Hz ~ 20 kHz, 1.5 dB ~ –3.0 dB
Maximum input level
PHONO (MM) (KRF-V7060D) ........... 45 mV, 1 % T.H.D. at 1 kHz
Signal to noise ratio (IHF’66)
PHONO (MM) (KRF-V7060D) ............................................... 75 dB
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)
............................................................................................... 95 dB
Loudness control
VOLUME at –30 dB level ...................................... +6 dB (100 Hz)
Input sensitivity / impedance
PHONO (MM) (KRF-V7060D) ............................... 6.0 mV / 47 k Ω
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)
.............................................................................. 500 mV / 47 k Ω
Output level / impedance
TAPE REC ............................................................... 500 mV / 1 k Ω
PRE OUT (SURROUND BACK CHANNEL) ............... 2.5 V / 1 k Ω
PRE OUT (SUBWOOFER) .......................................... 2.5 V / 1 k Ω
Tone control
BASS ............................................................... ±10 dB (at 100 Hz)
TREBLE ........................................................... ±10 dB (at 10 kHz)
DIGITAL AUDIO section
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length
Optical ........................... (–15 dBm ~ –24 dBm), 660 nm ±30 nm
Coaxial ................................................................... 0.5 Vp-p / 75
Ω
VIDEO section
VIDEO inputs / outputs
VIDEO (composite) ................................................. 1 Vp-p / 75 Ω
S VIDEO inputs /outputs
S VIDEO (luminance signal) ................................... 1 Vp-p / 75 Ω
S VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75 Ω
FM tuner section
Tuning frequency range ................................. 87.5 MHz ~ 108.0 MHz
Usable sensitivity (MONO)
VR-6050
................... 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz dev, SINAD 30 dB)
KRF-V7060D/V6060D .....................................................................
................... 1.6 µV (75 Ω)/ 15.2 dBf (75 kHz dev, SINAD 30 dB)
50 dB quieting sensitivity
STEREO ..................................................... 28 µV (75 Ω)/ 40.2 dBf
Total harmonic distortion
MONO (1 kHz, 75 kHz dev) .......................... 0.5% (65 dBf input)
STEREO (1 kHz, 67.5 + 6.75 kHz dev) ......... 0.7% (65 dBf input)
Signal to noise ratio
MONO (1 kHz, 75 kHz dev) ........................ 75 dB (65 dBf input)
STEREO (1 kHz, 67.5 + 6.75 kHz dev) ....... 68 dB (65 dBf input)
Stereo separation (1 kHz) ........................................................... 40 dB
Selectivity (±400 kHz) (VR-6050) ............................................... 70 dB
(KRF-V7060D/V6060D) .......................... 50 dB
Frequency response (30 Hz ~ 15kHz) ..................... +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range
10 kHz step ................................ 530 kHz ~ 1,700 kHz (VR-6050)
10 kHz step .......... 530 kHz ~ 1,610 kHz (KRF-V7060D/V6060D)
9 kHz step ............ 531 kHz ~ 1,602 kHz (KRF-V7060D/V6060D)
Usable sensitivity (30% mod, S/N 20 dB)
........................................................................ 16 µV / (600 µV/m)
Signal to noise ratio (30% mod, 400 Hz)
.......................................................... 50 dB (60 dBµ VEMF input)
GENERAL
Power consumption VR-6050 ....................................................... 3 A
KRF-V7060D/V6060D ............................ 300 W
AC outlet
SWITCHED VR-6050 ..................... (total 150 W, 1.25 A max.)
KRF-V7060D/V6060D .............. (total 90 W max.)
Dimensions ..................................................... W : 440 mm (17-5/16")
H : 159 mm (6-1/4")
D : 392 mm (15-7/16")
Weight (Net)
VR-6050 ................................................................ 9.4 kg (20.7 lb)
KRF-V7060D/V6060D ......................................... 10.0 kg (22.0 lb)
Caution : Read this page carefully to ensure safe
operation.
100 watts per channel minimum RMS, both channels driven,
at 8
Ω from 20 Hz to 20 kHz with no more than 0.09% total
harmonic distortion. (FTC)
100 watts per channel minimum RMS, both channels driven,
at 8
Ω from 20 Hz to 20 kHz with no more than 0.09% total
harmonic distortion. (FTC)
•VR6050/35-44/EN 4/9/02, 4:58 PM 42