Konica Minolta DiMAGE A2 - Manual (Page 141)

141
LCD brightness Monitor and EVF reset p. 132
Transfer mode Data storage p. 135
EVF auto switch Auto EVF/LCD p. 135
Custom setup DOF preview p. 136
File number memory Off p. 136
Setup menu
Focus signal 1 p. 142
Shutter FX 1 p. 142
Volume 2 p. 142
Auto power save 3 minutes p. 142
Anti-shake Display + exposure p. 143
Full-time AF Off p. 143
Grip sensor On p. 143
Control dial setup Front: shutter speed, Rear: aperture p. 144
Control dial setup (Manual exposure) Front: shutter speed, Rear: aperture p. 145
Delete confirmation “No” p. 145
AUDIO SIGNALS
Every time a button is pressed, an audio signal gives a
positive confirmation of the operation. The audio signals
can be turned off in section 3 of the setup menu (p. 130).
The tone of the signal can also be changed; signal 1 is
electrical and signal 2 is mechanical. Reset default –
Audio signals 1
Focus signal 1
Shutter FX 1
Volume 2
Power save 3 min.
FOCUS SIGNALS
When the shutter-release button is pressed partway down, an audio signal gives a
positive confirmation the AF system has focused. The focus signals can be changed or
turned off in section 3 of the setup menu (p. 130). Two tones are available.
Folder name Standard p. 137
Audio signals 1 p. 141
Lens accessory None p. 145