Wireless / remote flash – Konica Minolta DiMAGE A2 User Manual

Page 88

Advertising
background image

88

R

ECORDING MENU

WIRELESS / REMOTE FLASH

Wireless/Remote flash allows the camera to control
an off-camera Program/Maxxum 5600HS(D) and
3600HS(D) flash unit without the need of a cable.
Single or multiple flash units can be placed around
the subject to create different lighting effects.

The camera’s built-in flash fires to control the off-
camera flash units rather than to illuminate the
subject. See your local camera dealer about Minolta
lighting accessories.

On-camera
flash

Wireless/

Remote

flash

Set the camera to the wireless flash mode in section
1 of the recording menu (p. 80). This will
simultaneously set the flash to the wireless mode
and set the camera to the flash’s wireless channel.

Slide the cap off the accessory shoe (p. 75).

Slide the Program/Maxxum

5600HS(D) or

3600HS(D) flash on the accessory shoe until the
safety lock engages.

Turn on the camera and flash unit.

Image size
Quality

Flash mode

Fill-flash

Flash control

Red eye

AEL button

Rear sync.

Reset

Wireless

Advertising