Kenwood KRF-X7775D - Manual (Page 65)

57
Using R
eceiv
er
To switch control modes for Zone A or Zone B:
1. Press the F. SHIFT
= 11 (MULTI ZONE)* button on Remote Control
unit.
Multi Zone On
Menu
1 2 3
4 5 6
7 8 9
10 11 12
+10 0 +100
/ 8
/ 7
1 1
Each time the F. SHIFT
= 11 (MULTI ZONE)* button is pressed, switches
the On and Off.
Operating Devices in Zone B
1. Press the F. SHIFT
= 12 (ZONE A/B)* button on Remote Control unit.
Zone B
Menu
1 2 3
4 5 6
7 8 9
10 11 12
+10 0 +100
/ 8
/ 7
1 1
Each time the F. SHIFT
= 12 (ZONE A/B)* button is pressed, switches
Zone A and Zone B.
Devices connected via digital jacks only cannot be listened to in Zone B.
We recommend that you connect the analog jacks of all devices. You must
use the composite video connections. Only video sources connected with
composite connectors can be viewed in the second zone.
* When an operation is described as [F.SHIFT
= 11 (MULTI ZONE)
button], for example, press the F.SHIFT button and press the next button
(the 11 (MULTI ZONE) button in this case) within 8 seconds.
Using Remote Control Unit in Multiple Zones