Kodak RFS 3570 User Manual
Page 143
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using KODAK Drivers with Windows Applications — PC G 9-17
Rotate the Image
8. (Optional) Click 90
°
CCW, 180
°
, or 90
°
CW to rotate the image 90
°
counterclockwise (CCW), 180
°
, or 90
°
clockwise (CW), respectively.
Click N
ORMAL
to display the image as it is oriented in the film or slide
holder.
Sharpen the Image
9. (Optional) Use the S
HARPEN
drop down list box to adjust the level of
edge definition between image elements (pixels). Choose O
FF
, N
OR
-
MAL
, or H
IGH
; H
IGH
provides the most definition. Later, when you click
S
CAN
, the time required to complete the scan will increase slightly if
you select N
ORMAL
or H
IGH
.
NOTE: There is no immediate response when a S
HARPEN
option is selected;
instead this choice takes effect later when you click P
RE
S
CAN
or S
CAN
.
Set the Image to Black and White
10. (Optional) Click B & W to have all subsequent actions — including
the final scan — occur in black and white.
Focus the Image
11. (Optional) Use the Scanner to focus your image:
NOTE: You could focus the image without Step A below; however Step A is
helpful when working with an image that contains one area that is sharper
than the rest of the image.