Kodak RFS 3570 - Manual (Page 30)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-8  Installation (Hardware & Software) — Macintosh Computer G
4. Attach the SCSI terminator (supplied with the Scanner) to the empty
SCSI port on the Scanner, seat the terminator firmly, and pinch the
thin wire clamps shut.
Terminator
NOTE: If you are using a Macintosh IIfx computer, use the black terminator
supplied with that computer; it is not interchangeable with the terminator
supplied with the Scanner.
5. Continue at “Setting the Scanner SCSI Identification Number” later in
this chapter.
Serial Number 2
SCSI ID
3 3570
-
BACK OF FILM SCANNER
SCSI Terminator