Knoll Systems HD225 - Manual (Page 4)

4
Important Operating Considerations for Safety
• Place the projector in a horizontal position
with no greater than 8-degrees forward or
backwards tilt.
• Locate the projector in a well-ventilated
area without any obstructions to intake or
exhaust vents. Do not place the projector on
a tablecloth or other soft covering that may
block the vents.
• Locate the projector at least 4' (1.2 m) away
from any heating or cooling vents.
• Use only Knoll-approved ceiling mounts.
The minimum distance between the ceiling
and a ceiling-mounted projector is 11.8”/30
cm.
• Use only the power cord provided. A surge-
protected power strip is recommended.
• Refer to this manual for proper startup and
shutdown procedures.
• In the unlikely event of the lamp rupturing, discard any edible items placed in the surrounding
area and thoroughly clean the area along all sides of the projector.
•Wash hands after cleaning the area and handling the ruptured lamp. This product has a lamp
that contains a very small amount of mercury. Dispose of it as required by local, state or federal
ordinances and regulations. For more information see www.eiae.org.
Follow these instructions to help ensure image quality and lamp life over the life of the projector.
Failure to follow these instructions may affect the warranty. For complete details of the warranty,
see the Warranty section at the end of this User's Guide.