KTM 640 LC4 ENDURO - Manual (Page 10)

ENGLISH
9
Combination switch
The rocker switch LIGHTS 1 actuates the high beam or low beam.
= High-beam light
= Low-beam light
The light signal (high beam) is actuated with button 2 .
The indicator switch 3 returns to central position after actuation.
Press flasher switch towards switch housing to switch off the flasher.
The horn is sounded with button 4 .
Starter tip switch, emergency OFF tip switch, light switch
The emergency off switch 5 is provided for emergency situations and
should not be used to switch off the engine.
The engine is ready for operation in position
(ignition circuit and starter
circuit are switched on).
The engine cannot be started in position
(ignition circuit and starter
circuit are interrupted).
The light switch has 3 positions:
= Light off
= Parking light on
= Headlight on
Use the starter tip switch 6 to operate the electric starter.
Filler cap
The filler cap 7 can be locked and is provided with a fuel evaporation
control system.
To open the cap insert the ignition key, turn it 90° counterclockwise, then
lift off the filler cap.
To close the tank insert the filler cap, turn the ignition key 90° clockwise
and take out the key.
1
5
7
6
2
1
3
4