Menu operation – Kenwood KDC-MP142 User Manual
Page 10
10
|
KDC-MP242/KDC-MP142/CR
Menu Operation
Function of KDC-MP242
Activating Security Code
When Security Code is set, possibility of theft
is reduced because input of Security Code is
prompted to turn on the unit once it is turned off.
⁄
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
1
Enter Standby
Press the [SRC] button.
Select the “STANDBY” display.
2
Enter Menu mode
Press the Search button for at least 1 second.
When “MENU” is displayed, “CODE SET” is also
displayed.
3
Enter Security Code mode
Press the [AUD] knob for at least 1 second.
When “ENTER” is displayed, “CODE” is also displayed.
4
Select the digits to enter
Press the [
4] or [¢] button.
5
Select the Security Code numbers
Press the [FM+] or [AM–] button.
6
Repeat steps 4 and 5, and complete the
Security Code.
7
Confirm the Security Code
Press the [AUD] knob for at least 3 seconds.
When “RE-ENTER” is displayed, “CODE” is also
displayed.
8
Do the step 4 through 7 operation, and reenter
the Security Code.
“APPROVED” is displayed.
The Security Code function activates.
⁄
• If you enter the wrong Code in steps 4 through 6, repeat
from step 4.
9
Exit Security Code mode
Press the Search button.
Resetting the Security Code function when the
audio unit is first used after removed from the
battery power source or the Reset button is
pressed
1
Turn the power ON.
2
Do the step 4 through 7 operation, and enter
the Security Code.
“APPROVED” is displayed.
Now, you can use the unit.
⁄
• When the Security Code function is activated, “CODE
SET” changes to “CODE CLR”.
• To deactivate the Security Code function, see the next
section <Deactivating Security Code>.
Function of KDC-MP242
Deactivating Security Code
To deactivate the Security Code function.
1
Enter Standby
Press the [SRC] button.
Select the “STANDBY” display.
2
Enter Menu mode
Press the Search button for at least 1 second.
“MENU” is displayed.
3
Select Security Code mode
Press the [FM+] or [AM–] button.
Select the “CODE CLR” display.
4
Enter Security Code mode
Press the [AUD] knob for at least 1 second.
When “ENTER” is displayed, “CODE CLR” is also
displayed.
5
Select the digits to enter
Press the [
4] or [¢] button.
6
Select the Security Code numbers
Press the [FM+] or [AM–] button.
7
Repeat steps 4 and 5, and complete the
Security Code.
8
Press the [AUD] knob for at least 3 seconds.
“CLEAR” is displayed.
The Security Code function deactivates.
9
Exit Security Code mode
Press the Search button.
⁄
• If a wrong security code is entered, “ERROR” is displayed.
Enter a correct security code.