Installation – Kenwood KDC-MP142 User Manual

Page 17

Advertising
background image

English

|

17

Installation

non-Japanese cars

Bend the tabs of the
mounting sleeve with a
screwdriver or similar utensil
and attach it in place.

• Make sure that the unit is installed securely in place. If the

unit is unstable, it may malfunction (for example, the sound
may skip).

Japanese cars

1

Refer to the section <Removing the hard rubber

frame> and then remove the hard rubber frame.

2

Align the holes in the unit (two locations on each

side) with the vehicle mounting bracket and secure
the unit with the accessory screws.

8 mm
MAX.

ø5mm

ø5mm

8mm
MAX.

T

N

T

N

T/N

T: Toyota cars
N: Nissan cars

Accessory3...for Nissan car
Accessory4...for Toyota car

3

4

Removing the hard rubber frame

1

Engage the catch pins on the removal tool and

remove the two locks on the upper level.
Upper the frame and pull it forward as shown in
the figure.

Catch

Lock

Accessory2
Removal tool

2

When the upper level is removed, remove the

lower two locations.

• The frame can be removed from the bottom side in the

same manner.

Removing the Unit

1

Refer to the section <Removing the hard rubber

frame> and then remove the hard rubber frame.

2

Insert the two removal tools deeply into the slots

on each side, as shown.

3

Lower the removal tool toward the bottom, and

pull out the unit halfway while pressing towards
the inside.

Accessory2

¤

• Be careful to avoid injury from the catch pins on the

removal tool.

4

Pull the unit all the way out with your hands, being

careful not to drop it.

Advertising