Konica Minolta Q-M100 - Manual (Page 55)

Getting icons to appear on TV screen
①
Setting of frame protection
② Erase
③ Information on Frame protection
④ Image quality mode
⑤ Frame number
⑥ Index playback
⑦ Slide show
※ Select a desired icon with the SELECT button.
●
In the condition that a TV set is used to play back pictures, available
functions are limited to those mentioned below.
When a picture is played back with a TV set, data and time when the pic-
ture was taken don’t appear on the screen.
Only four icons that respectively represent “Setting of frame protection”,
“Erase”, “Index playback” and “Slide show” functions can be shown on a
TV screen, and two of them can be shown on the screen at a time.
For selecting other functions, disconnect the TV set and select a desired
function with the picture appearing on the LCD monitor.
For details of respective functions, refer to explanation of “Applied opera-
tion”.
○ Don’t connect/disconnect video output cord to/from the video port during
setting operation, otherwise previous setting is canceled.
○ Don’t connect/disconnect the video output cord while the card access
warning lamp is on, otherwise the CF card or stored data may be dam-
aged.
② ①
③ ④ ⑤
⑥ ⑦