Kenwood DNR-1000U - Manual (Page 10)

10 | DNR-1000U
Tuner features
Tuning
Selecting the station.
1 Select tuner source
Press the [POWER] button.
Select the "TUNER" display.
2 Select the band
Push the Control knob towards [FM] or [AM].
Each time you push the knob toward [FM], it
switches between the FM1, FM2, and FM3 bands.
3 Tune up or down band
Push the Control knob towards [ 4] or [¢].
⁄
• During reception of stereo stations the "ST" indicator is
ON.
Tuning Mode
Choose the tuning mode.
Press the [AUTO] button.
Each time you press the button, the Tuning mode
alternates between the modes shown in the table
below.
Tuning mode Display Operation
Auto seek "AUTO 1" Automatic search for a station.
Preset station seek "AUTO 2" Search in order of the stations in
the Preset memory.
Manual "MANUAL" Normal manual tuning control.
FM
AM
POWER
AUTO/AME 1 – 6
Control knob
ST indicator
Band display Frequency display
Preset station number