Kenwood DNR-1000U - Manual (Page 17)

English | 17
In Standby mode
Manual Clock Adjustment
1 Select Clock Adjustment mode
Push the Control knob towards [FM] or [AM].
Select the "CLK ADJ" display.
2 Enter Clock Adjust mode
Press the Control knob for at least 1 second.
The clock display blinks.
3 Adjust the hours
Push the Control knob towards [FM] or [AM].
Adjust the minutes
Push the Control knob towards [ 4] or [¢].
4 Exit Clock adjustment mode
Press the [MENU] button.
In Standby mode
SI (System Indicator)
The red indicator blinks when the ignition key of
the vehicle is at the OFF position.
Display Setting
"SI ON" LED flashes.
"SI OFF" LED OFF.
In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
Display Setting
"BEEP ON" Beep is heard.
"BEEP OFF" Beep canceled.