Keys Fitness ST-IB - Manual (Page 4)

4
Assembly
Olympic Adapter
Leg Extension
w/ Curl Bar
Weight Plate Holder
Safety Spotter
Weight Rest
Adjustable Tube
Arm Curl Pad
Thank you for purchasing the Strength Trainer International Bench! The quality product you
have chosen was designed to meet your needs for cardiovascular exercise. Before you start,
please read the Owner’s Manual and become familiar with the operation of your new unit.
Remember to take the time to perform stretching exercises, provided in this manual, to help
avoid injury.
Getting Started - The Strength Trainer International Bench will require some assembly.
Unpack the box in a clear area. Remove packing material. Do not dispose of packing mate-
rial until assembly is complete and unit is working properly. Place the unit on a clean level
surface for assembly. Before assembling, the unit should be placed as close as possible to its
final location. If you are missing any parts or hardware, please call Keys Fitness at 1-888-340-
0482. Tools have been provided to assist with product assembly. Keys Fitness recommends for
two people to assemble the unit. As you assemble the bench, make sure all parts are oriented
as shown in the drawings.
The included hex key, grease packet, and the following tools (not included) are recommended
for assembly.
Hex Key (Included)
Two Adjustable Wrenches
Rubber Mallet
Flat Head Screwdriver
Phillips Head Screwdriver